Fortigate 60D 配置cacti 出现snmp error,snmp udp 161端口可通,但实际没有snmp数据返回

cacit  SNMP - Interface Statistics debug log如下,显示没有返回snmp data,测试udp 161可以连通

+ Running data query [1].
+ Found type = '3' [SNMP Query].
+ Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/interface.xml'
+ XML file parsed ok.
+ Executing SNMP get for num of indexes @ '.1.3.6.1.2.1.2.1.0' Index Count:
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1' Index Count: 0
+ No SNMP data returned

nmap扫了一下snmp端口也是通的
Starting Nmap 6.40 ( http://nmap.org ) at 2016-03-07 15:58 CST
Nmap scan report for localhost (10.163.0.1)
Host is up (0.030s latency).
PORT    STATE         SERVICE
161/udp open|filtered snmp

飞塔防火墙snmp配置,snmp已enable:
FG140P3G15801030 (community) # show
config system snmp community
    edit 1
        set name "xdf2010"
            config hosts
                edit 3
                    set ip 10.200.2.27 255.255.255.255
                    set interface "lan"
                next
            end
        set events cpu-high mem-low log-full intf-ip vpn-tun-up vpn-tun-down ha-switch ha-hb-failure ips-signature ips-anomaly av-virus av-oversize av-pattern av-fragmented fm-if-change bgp-established bgp-backward-transition ha-member-up ha-member-down ent-conf-change av-conserve av-bypass av-oversize-passed av-oversize-blocked ips-pkg-update ips-fail-open faz-disconnect wc-ap-up wc-ap-down
    next
end
已邀请:

kmliu - Fortinet-TAC

赞同来自:

Cacti上SNMP community 是填写的“xdf2010”吗?

jony - XDF_ShiJie

赞同来自:

是的
edit 1
set name "xdf2010"

要回复问题请先登录注册